Shanghai Saintenna Wireless Technology Co., Ltd.
Shanghai Saintenna Wireless Technology Co., Ltd.
Add to Cart
Car FM/AM Antenna Radio car FM antenna for vehicle used antenna
PRODUCT INFORMATION
| Mechanical Specification | |
| Name | GPS antenna |
| Part Number | SAA31091A |
| Dimension(mm) | 37×42.5×17 |
| Connect Type | SMA-J |
| Cable Length(mm) | RG174-1.0m |
| Color | Black |
| Work Temp.(℃) | -40℃～+85℃ |
| Humidity | <75% |
| Antenna | LNA | ||
| Frequency Range(MHz) | 1575.42±2&1561±2 | Voltage | 3.0-5.0V |
| -10dB Bandwidth | ≥10MHz | Current | 25mA |
| Return Loss | ≤‐20dB | Output VSWR | 1.5max |
| Gain(dBi) | -2 | Gain(DC3V) | 28 |
| Polarization | RHCP | Noise Figure(DC3V) | 1.0dB max |
| Axial Ratio | ≤3 | Input Impedance(Ω) | 50 |
| Mechanical Specification | |
| Name | Ceramic Dielectric Antenna |
| Part Number | SAS60081A |
| Dimension(mm) | 18×18×4 |
| Connect Type | PIN |
| Work Temp.(℃) | -40℃～+85℃ |
| Humidity | <75% |
| Electrical Specification | |
| Frequency Range(MHz) | 1575.42±1.023 |
| -10dB Bandwidth | ≥10MHz |
| Return Loss | ≤‐20dB |
| Gain(dBi) | 3 |
| Polarization | RHCP |
| Axial Ratio | ≤4 |
| Input Impedance(Ω) | 50 |
| Frequency Temperature Coefficient | 20ppm/deg.℃ |
| Mechanical Specification | |
| Name | Ceramic Dielectric Antenna |
| Part Number | SAA31280A |
| Dimension(mm) | 48×48×12.4 |
| Connect Type | SMA |
| Work Temp.(℃) | -40℃～+85℃ |
| Humidity | <75% |
| Electrical Specification | |
| Frequency Range(MHz) | GPS/L1/L5 |
| -10dB Bandwidth | ≥10MHz |
| Return Loss | ≤‐20dB |
| Gain(dBi) | 30 |
| Polarization | RHCP |
| Axial Ratio | ≤4 |
| Input Impedance(Ω) | 50 |
| Frequency Temperature Coefficient | 20ppm/deg.℃ |
| Mechanical Specification | |
| Name | Ceramic Dielectric Antenna |
| Part Number | SAA31280B |
| Dimension(mm) | 58×60×28 |
| Connect Type | SMA |
| Work Temp.(℃) | -40℃～+85℃ |
| Humidity | <75% |
| Electrical Specification | |
| Frequency Range(MHz) | GPS/L1/L5 |
| -10dB Bandwidth | ≥10MHz |
| Return Loss | ≤‐20dB |
| Gain(dBi) | 30 |
| Polarization | RHCP |
| Axial Ratio | ≤4 |
| Input Impedance(Ω) | 50 |
| Frequency Temperature Coefficient | 20ppm/deg.℃ |
| Mechanical Specification | |
| Name | Car FM antenna |
| Part Number | |
| Dimension(mm) | Φ31×51 |
| Connect Type | SMA-J |
| Cable Length(mm) | |
| Color | Black |
| Work Temp.(℃) | -40℃～+85℃ |
| Humidity | <75% |
| Frq(MHz) | AR(dB) | Efficiency(%) | GAIN (0°) | GAIN (±30°) | GAIN (±60°) |
| 1980 | 0.9 | 59.76 | 5.63 | 4.80 | 1.22 |
| 1990 | 0.8 | 68.31 | 6.26 | 5.43 | 1.82 |
| 2000 | 0.7 | 63.20 | 5.89 | 5.09 | 1.43 |
| 2010 | 0.46 | 59.96 | 5.55 | 4.82 | 1.20 |
| 2170 | 0.01 | 58.51 | 5.68 | 4.98 | 1.47 |
| 2180 | 0.33 | 56.03 | 5.49 | 4.81 | 1.26 |
| 2190 | 0.75 | 57.43 | 5.72 | 4.96 | 1.34 |
| 2200 | 0.92 | 57.28 | 5.84 | 5.00 | 1.23 |
RELIABILITY TEST REPORT
| No. | Item | Test Condition | Remark |
| 1 | Humidity | The device shall be placed in 90%~95% relative humidity and at 60℃±3℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the specification |
| 2 | High Temperature | The device shall be placed at 85℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the specification |
| 3 | Low Temperature | The device shall be placed at -40℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the specification |
| 4 | Temperature Cycle | The device shall be placed at -40℃ for 30 min then at 85℃ for 30 min. Cycling shall be repeated 5 times. At the room temperature for 1h | It shall fulfill the specification |
| 5 | Salt Spray Test | The device shall be placed in salt spray box (5% NaCl) at 25℃±5℃ for 24h. | It shall fulfill the specification |
| 6 | Vibration Test | The device shall be subjected to vibration for 2h each in x,y and z axis with the amplitude of 1.5mm, the frequency shall be varied uniformly between the limits of 10Hz~55Hz. | It shall fulfill the specification |
| 7 | IP5X Test | The device shall be placed in the dust test machine, dust blowing mode, at 35℃ for 4 hours, then turn on dust floating mode, at 45℃ for 4 hours. | It shall fulfill the specification |
| 8 | IPX6 Test | The device shall be placed in spray water in all direction. Nozzle inner diameter 12.5mm, water flow 100±5L/min, for 3min | It shall fulfill the specification |
PRODUCT PICTURE
PRODUCT CATEGORY
Our Main prouct is Wifi antenna, GPS antenna, GNSS antenna, 433mhz antenna, PCB antenna, FPC antenna, 4G lte antenna and so on.
1. Payment available: 100% T/T, Western Union, Paypal and so on.
2. Country of origion: Shanghai, China
3. Delivery terms: By sea or air or express( EMS, DHL, UPS, FedEx, TNT and so on)
